0801 ball screw accuracy
0801 ball screw accuracy cannot be inferred from its 1mm lead: theoretical travel per revolution is not positioning accuracy. WY’s 0801 miniature ball screw has an 8mm diameter, a 1mm lead, and ground or rolled manufacturing options. A 1mm lead does not guarantee 1 micron positioning accuracy; select the specific structure, process, and accuracy grade separately.
Does a 1mm lead determine miniature ball screw positioning accuracy?
No. For an 8mm ball screw 1mm lead configuration, the 1mm value describes theoretical movement per revolution, not a positioning tolerance.
For ball screw resolution vs accuracy, do not turn the lead value into an accuracy claim. The 0801 designation identifies a diameter-and-lead combination; it does not replace a specification for lead error, repeatability, backlash, or minimum feed amount.
Which accuracy grades and nut configurations does WY offer?
WY lists C1 / C3 / C5 / C7 accuracy grades for its SSIA, SSIC, and SSIF miniature ball screw products that include 0801. The configurations below retain their individual type and nut descriptions.
Type | Nominal diameter | Accuracy grade | Nut type |
|---|---|---|---|
SSIA type miniature ball screw | 8mm | C1 / C3 / C5 / C7 | flange nut |
SSIC type miniature ball screw | 8mm | C1 / C3 / C5 / C7 | flange nut |
SSIF (SSUF) | 8mm | C1 / C3 / C5 / C7 | flange nut |
Do not transfer parameters between different structures or manufacturing processes. IT accuracy designations and C grades are not directly interchangeable.
How should buyers specify an 0801 ball screw for acceptance?
Specify lead error, repeatability, backlash, and minimum feed amount separately rather than treating the 1mm lead as their acceptance value. Keep ball screw repeatability and backlash distinct from the selected accuracy grade in the purchasing requirements.
Application-specific acceptance values, inspection arrangements, material, preload, length, and operating capability are confirmed with WY’s engineering team for the specific application.
WY’s 0801 material options are SUS440C, 9Cr18, GCr15, and 1.4104, with custom orders starting at one piece. Its selection applications include optical focusing, small-displacement alignment, inspection and metrology sample adjustment, laboratory sample positioning, and miniature actuator fine feed—not proof of a particular machine’s positioning performance.
Send drawings and application requirements to WY for review.
Does a 1mm lead miniature ball screw guarantee 1 micron positioning accuracy?
No. The 0801’s 1mm lead describes theoretical movement per revolution, not positioning accuracy.
Which accuracy grades does WY list for 0801 miniature ball screws?
WY lists C1 / C3 / C5 / C7 for its SSIA, SSIC, and SSIF miniature ball screw products that include 0801. Parameters must not be transferred between different structures or manufacturing processes.
What manufacturing and material options are available for the 0801?
The 0801 is available in ground or rolled versions. Material options are SUS440C, 9Cr18, GCr15, and 1.4104; custom orders start at one piece.





Comments